Smooth Fitness Product Support

Quick Start Guide for sitNcycle

(Click here to view a PDF version of the images below)


Moving/Transporting the sitNcycle

Verify that the seat is locked in place and cannot be removed. Verify the seat adjustment knob is fully tightened.

  1. Lower the seat to the lowest height setting. Prior to moving the unit verify that the seat is locked in place and the seat adjustment knob is fully tightened.
  2. There is a transportation handle the under the back of the seat.
  3. Hold the transportation handle and tilt the unit forward until the wheels are resting on the floor.(about 15 to 20 degrees).
  4. Roll the unit forward to the desired location.
  5. Once the unit is in place, verify that all 4 stabilizing feet are firmly in contact with the floor.

Failure to follow the instructions above may cause the seat to become disengaged from the unit frame during transportation.


Adjusting the Resistance of the sitNcycle

  1. There are numbers on the resistance dial ranging from 1 through 8. Number 1 is the least amount of resistance offered and number 8 is the maximum amount offered.
  2. To increase the resistance, turn the dial clockwise.
  3. To decrease the resistance, turn the dial counter-clockwise.

Adjusting the Pedal Arms on the sitNcycle

(Click here to view a PDF version of the images below)

Smooth Fitness | Treadmills & Ellipticals

Talk to a Fitness Consultant
888-211-1611
Mon-Fri: 8:30AM–6:00PM ET, Sat & Sun: Closed

© 2000-2014, Smooth Fitness™
Smooth Fitness is a Registered Trademark of Smooth Fitness, LLC.